Description
Omnipure – K2340 – 6″ x 2″ T40 GAC Coconut Carbon Inline Filter
The Omnipure K-Series K2340 filters feature 1/4″ and 3/8″ Quick-Connect fittings that make this filter really easy to install and replace. It can be used in refrigerators, ice makers, any reverse osmosis system and many under-counter water filtration systems. It also helps remove chlorine taste and odor, and taste and odor in the water.
- Dimensions: 2″ W X 6″ L
- Flow Rate: .5 GPM
- Maximum Pressure: 125 PSIG
- Maximum Temperature: 100 F
- Service Life: 1 Year or 1000 Gallons
- Filtration Media: Granulated Activated Carbon
- Volume Cubic Inch: 9.5
- Reduces: Chlorine Taste & Odor
- Fitting Size: Quick-Connect 1/4″ and 3/8″ fittings
- Omnipure K2340 has been tested for performance under NSF Standard 42.
**Interchangeable carbon with T28, T33 and T40 models.
| National Pipe Thread (NPT) Size Measured Against a Ruler* | |
|
Actual Diameter (Inches) |
National Pipe Thread (NPT) (Fractional) |
| 0.405″ | 1/8″ |
| 0.540″ | 1/4″ |
| 0.675″ | 3/8″ |
| 0.840″ | 1/2″ |
*NOTE: A very common misconception is that a 1/4″ NPT measures as 1/4 inch on a ruler or tape measurer. However, that is not the case. NPT will measure larger in diameter. Above is a sizing reference to help clarify.
