Description
Jaco – Male Connector Fitting with Ferrule Nut and Integral Sleeve – Kynar
Male Connectors with Ferrule Nut with integral sleeve low pressure applications soft plastic tubing 50 PSI
- Kynar® is resistant to highly corrosive fluids & UV
- Use Kynar® fittings with Kynar®, PTFE, FEP & PFA tubing
- Kynar® Pressure: 1/8″ 50 psi; 1/4″ & up 220 psi
- Temperature range: -80°F to 275°F (Kynar®)
- Kynar® meet FDA standards & are NSF listed
- Polypropylene is NSF 61 listed
| National Pipe Thread (NPT) Size Measured Against a Ruler* | |
|
Actual Diameter (Inches) |
National Pipe Thread (NPT) (Fractional) |
| 0.405″ | 1/8″ |
| 0.540″ | 1/4″ |
| 0.675″ | 3/8″ |
| 0.840″ | 1/2″ |
*NOTE: A very common misconception is that a 1/4″ NPT measures as 1/4 inch on a ruler or tape measurer. However, that is not the case. NPT will measure larger in diameter. Above is a sizing reference to help clarify.
** For high pressure needs, add a gripper to increase pressure grip to 220 PSI
